ملخص: Potential applications of digitalmicrofluidic (DMF) biochips now include several areas of real-life applications like environmental monitoring, water and air pollutant detection, and food processing to name a few. In order to achieve sufficiently high throughput for these applications, several instances of the same bioassay may be required to be executed concurrently on different samples. As a straightforward implementation, several identical biochips can be integrated on a single substrate as a multichip to execute the assay for various samples concurrently. Controlling individual electrodes of such a chip by independent pins may not be acceptable since it increases the cost of fabrication. Thus, in order to keep the overall pin-count within an acceptable bound, all the respective electrodes of these individual pieces are connected internally underneath the chip so that they can be controlled with a single external control pin. In this article, we present an orientation strategy for layout of a multichip that reduces routing congestion and consequently facilitates wire routing for the electrode array. The electrode structure of the individual pieces of the multichip may be either direct-addressable or pin-constrained. The method also supports a hierarchical approach to wirerouting that ensures scalability. In this scheme, the size of the biochip in terms of the total number of electrodes may be increased by a factor of four by increasing the number of routing layers by only one. In general, for a multichip with 4n identical blocks, (n+ 1) layers are sufficient for wire routing.

لغة: إنجليزية
الفهرس العشري 621 .الفيزياء التطبيقية (الهندسة الكهربائية ، الهندسة المدنية ، الهندسة الميكانيكية ، الهندسة التطبيقية ، المبادئ الفيزيائية في الهندسة)
الموضوع الإعلام الآلي

الكلمات الدالة:
Design automation
Wire routing
Bioassays
Design